MECASTACK SOFTWARE
SOFTWARE FEATURES:
  • 3D Graphics
  • Customizable Load Combinations
  • Specify Grade Elevation
  • P-Delta Analysis
  • Guy Wire Design
  • Lifting Analysis of Stack
  • Toggle Between Imperial & Metric Units
  • Customizable Outputs
  • Calculate Frequency for Higher Modes
Guy wire supported stack design can be extremely complicated.  The designer must consider the nonlinearity of the cables as well as all combinations of load direction, corrosion and temperature in order to find the worst case for each element of the design.  Most general purpose structural programs (StaadPro, Risa, etc..) simply don't handle guyed stack design adequately, or they make it extremely difficult and time consuming.  MecaStack not only makes modeling a guyed stack simple, but it automatically constructs an array of load cases to ensure that the worst case scenarios for each element of the design is captured.  It also helps with the selection of the appropriate guy wire hardware.  The design of one guyed stack usually saves enough time to recover the cost of the software.
Outputs are customizable in MecaStack. The user may select which output is displayed before anything is analyzed. Then once the analysis is ran, the user can select from a table of contents which items are going to be presented in the final report. Also, clicking on any of the table of contents will take the user directly to that section. Sections involving "Pass" or "Fail" criteria are displayed with the colors and. This allows the user to quickly determine if there are any problems in the stack.
DESIGN CODES:
Comprehensive Codes
Stress Codes
Along Wind
Across Wind
Fatigue
Seismic
ASME STS-1 (US Code)
ASME STS-1
ASCE 7-05/10
ASME STS-1
CICIND
IBC 2006
IS 6533 (Indian)
IS 6533
IS 875
IS 6533
AISC 360-05
IS 875
CICIND (Int'l)
CICIND
CICIND
CICIND
 
UBC-97
 
AISC 360-05
NBC
NBC
 
Manual G
   
EN1991-1-4
EN1991-1-4
   
   
BS CP 3 Ch. V
BS 4076
   
   
BS 6399
     
   
UBC-97
     
MECASTACK SELF & GUY WIRE SUPPORTED PRICING:
MODULES
SINGLE USER
FLOATING NETWORK
   
New Lease
Early Renewal*
New Lease
Early Renewal*
Self Supported
$1,300
$1,170
Self & Guy Supported
$2,150
$1,937
for a quote.
*Early renewal Pricing applies If renewed prior to current lease expiring
 Note: P-Delta Analysis is only included with the Guy Wire Supported Stack.

Click here for more information on Single User and Floating Network licensing
FREQUENTLY ASKED QUESTIONS:
Can I get a fully functioning demo to try out the software?
We offer a limited demo, but we do not offer a fully functioning demo.
 
Does the program have a help manual?
The software has a help manual which is searchable and can be navigated on the computer, but is not suitable for printing. 
 
Do I receive a CD with my purchase?
We do not send CD's with purchase, all software is downloaded. 
 
How quickly can I begin using the software?
Our order process is completely automated. If you purchase online, you will automatically receive an email with instructions on downloading and activating the software. This information also appears on the last page of the order process. You will be using the software in minutes after purchase.
 
How do I renew the lease on my sofware to get the Early Pricing?
Thirty (30) days prior the the expiration date on your lease, you should receive an email reminder.  In addition, any time you open the software within that 30 day period prior to expiration, you will get a warning in the software that it's about to expire.  To renew pricing and get the best pricing, go to the "Customer Portal" option at the top of this page.  Log into our customer portal, and then go to "Renewals and Upgrades".  Here you shoudl see the [Early] renewal option.  Place the order online, and the expiration date will automatically be extended by one (1) year. 
 
What is new in MecaStack?
We have created several videos to help show the improvements in MecaStack, as well as how to solve certain common problems.  Visit http://www.youtube.com/mecaenterprises
MECA ENTERPRISES INC.
+1 918 258 1057
816 W. Elgin St., Broken Arrow, OK 74012
Software Download
Latest Build: Click to download      Revision Log: Click to download
Copyright 2017 | Meca Enterprises Inc.
MecaStack is the most widely used software in the world for designing self-supported and guy wire supported steel stacks.  An easy to use Windows based interface allows designers to quickly model a stack.

A 3D model of the stack is automatically displayed on the screen providing a quick visual check of all information entered.  The user has complete control over the codes that are used for Along Wind, Across Wind, Stress and Fatigue. 

Load Combinations and factors can be customized as needed.  The output is easy to navigate, problem areas may be located quickly, and the designer may select the calculations that are presented to the client.
Meca Enterprises Inc.
Click to use our contact form